Analytical Pyrolysis of Pinus radiata and Eucalyptus globulus: Effects of Microwave Pretreatment on Pyrolytic Vapours Composition.

Pinus radiata (PR) and Eucalyptus globulus (EG) are the most planted species in Chile. This research aims to evaluate the pyrolysis behaviour of PR and EG from the Bío Bío region in Chile. Biomass samples were subjected to microwave pretreatment considering power (259, 462, 595, and 700 W) and time (1, 2, 3, and 5 min). The maximum temperature reached was 147.69 °C for PR and 130.71 °C for EG in the 700 W-5 min condition, which caused the rearrangement of the cellulose crystalline chains through vibration and an increase in the internal energy of the biomass and the decomposition of lignin due to reaching its glass transition temperature. Thermogravimetric analysis revealed an activation energy (Ea) reduction from 201.71 to 174.91 kJ·mol-1 in PR and from 174.80 to 158.51 kJ·mol-1 in EG, compared to the untreated condition (WOT) for the 700 W-5 min condition, which indicates that microwave pretreatment improves the activity of the components and the decomposition of structural compounds for subsequent pyrolysis. Functional groups were identified by Fourier transform infrared spectroscopy (FTIR). A decrease in oxygenated compounds such as acids (from 21.97 to 17.34% w·w-1 and from 27.72 to 24.13% w·w-1) and phenols (from 34.41 to 31.95% w·w-1 and from 21.73 to 20.24% w·w-1) in PR and EG, respectively, was observed in comparison to the WOT for the 700 W-5 min condition, after analytical pyrolysis. Such results demonstrate the positive influence of the pretreatment on the reduction in oxygenated compounds obtained from biomass pyrolysis.

Pyrolysis of Chilean Southern Lignocellulosic Biomasses: Isoconversional Kinetics Analysis and Pyrolytic Products Distribution.

Biomass provides potential benefits for obtaining value-added compounds instead of straight burning; as Chile has forestry potential that supports such benefits, it is crucial to understand the biomasses' properties and their thermochemical behaviour. This research presents a kinetic analysis of thermogravimetry, and pyrolysis of representative species in the biomass of southern Chile, heating biomasses at 5 to 40 °C·min-1 rates before being subjected to thermal volatilisation. The activation energy (Ea) was calculated from conversion using model-free methods (Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Friedman (FR)), as well as the Kissinger method based on the maximum reaction rate. The average Ea varied between KAS 117 and 171 kJ·mol-1, FWO 120-170 kJ·mol-1, and FR 115-194 kJ·mol-1 for the five biomasses used. Pinus radiata (PR) was identified as the most suited wood for producing value-added goods based on the Ea profile for the conversion (α), along with Eucalyptus nitens (EN) for its high value of reaction constant (k). Each biomass demonstrated accelerated decomposition (an increase in k relative to α). The highest concentration of bio-oil containing phenolic, ketonic, and furanic compounds was produced by the forestry exploitation biomasses PR and EN, demonstrating the viability of these materials for thermoconversion processes.

Synergistic Effects and Mechanistic Insights into the Co-Hydropyrolysis of Chilean Oak and Polyethylene: Unlocking the Potential of Biomass-Plastic Valorisation.

This study employed a hydrogen atmosphere in an analytical reactor to investigate the thermochemical transformation of Chilean Oak (ChO) and polyethylene. Thermogravimetric assays and compositional analyses of the evolved gaseous chemicals provided valuable insights regarding the synergistic effects during the co-hydropyrolysis of biomass and plastics. A systematic experimental design approach assessed the contributions of different variables, revealing the significant influence of the biomass/plastic ratio and hydrogen pressure. Analysis of the gas phase composition showed that co-hydropyrolysis with LDPE resulted in lower levels of alcohols, ketones, phenols, and oxygenated compounds. ChO exhibited an average oxygenated compound content of 70.13%, while LDPE and HDPE had 5.9% and 1.4%, respectively. Experimental assays under specific conditions reduced ketones and phenols to 2-3%. Including a hydrogen atmosphere during co-hydropyrolysis contributes to enhanced reaction kinetics and reduced formation of oxygenated compounds, indicating its beneficial role in improving reactions and diminishing the production of undesired by-products. Synergistic effects were observed, with reductions of up to 350% for HDPE and 200% for LDPE compared to the expected values, achieving higher synergistic coefficients with HDPE. The proposed reaction mechanism provides a comprehensive understanding of the simultaneous decomposition of biomass and polyethylene polymer chains, forming valuable bio-oil products and demonstrating the how the hydrogen atmosphere modulates and influences the reaction pathways and product distribution. For this reason, the co-hydropyrolysis of biomass-plastic blends is a technique with great potential to achieve lower levels of oxygenated compounds, which should be further explored in subsequent studies to address scalability and efficiency at pilot and industrial levels.

Value-added long-chain aliphatic compounds obtained through pyrolysis of phosphorylated chitin.

In this work, chitin, as a biobased polymer, is used as a precursor to obtain a phosphorylated derivatives. The influence of the different degree of phosphorylation in chitin on pyrolysis pattern was investigated. In order to understand the pyrolysis mechanism and the potential application of phosphorylated chitins, the samples were pyrolyzed at different temperatures and analyzed by FTIR, SEM, and Py-GC/MS analysis. Moreover, the thermal degradation and the evolved gases during chitin degradation and its derivatives were measured. The results showed that phosphorylation of chitin decreased the thermal stability of biopolymer and significantly changed the pattern of pyrolysis compared to neat chitin. The production of long-chain hydrocarbons was detected during pyrolysis of phosphorylated chitin, whereas this was not the case with raw chitin. Those two effects were more pronounced as the degree of phosphorylation increased. Chitin with the degree of phosphorylation (DS 1.35) exhibited the highest selectivity (91 %) towards production of long-chain hydrocarbons (C12-C17) at 500 °C. Moreover, the obtained results allowed to propose, for the first time, the mechanism of pyrolysis of phosphorylated chitin.

Microwave-assisted MOF@biomass layered nanomaterials: Characterization and applications in wastewater treatment.

MOF@Biomass layered hybrids were designed through in situ growth from rice husk (RH) and microwave-assisted synthesized MIL-53(Al) particles that enable the reduction of reaction times. The synthesis process included steps to pretreat RH, Al adsorption on RH, and then MIL-53(Al) in-situ growth reaction at 125 °C for 60 min and 200 W irradiation power. The resulting hybrid (MIL-53(Al)@RH) and its parent separate materials were characterized using TGA, SEM, FTIR, XRD, among others. MIL-53(Al)@RH showed high crystallinity in the hybridized MOF particles, thermal decomposition phases, and functional groups (Al-O, O-H, CO, and CC). The hybrid particles allow an easy separation during heterogeneous processing due to their 400 times larger size compared to MIL-53(Al) crystals. The properties of the layered hybrids for removal of Oxytetracycline (OTC), Diclofenac (DCL), and Glyphosate (GLY) in aqueous solutions, were tested by adsorption (ADS) and advanced oxidation processes (AOP). The high ADS capacities (162 mg g-1 GLY, 139 mg g-1 OTC, 93 mg g-1 DCL) and % removal in AOP (97% GLY, 91% OTC, 80% DCL) demonstrated that MIL-53(Al) maintained its properties after hybridization.

Upcycling agro-industrial blueberry waste into platform chemicals and structured materials for application in marine environments.

Blueberry pruning waste (BPw), sourced as residues from agroforestry operations in Chile, was used to produce added-value products, including platform chemicals and materials. BPw fractionation was implemented using biobased solvents (γ-valerolactone, GVL) and pyrolysis (500 °C), yielding solid fractions that are rich in phenols and antioxidants. The liquid fraction was found to be enriched in sugars, acids, and amides. Alongside, filaments and 3D-printed meshes were produced via wet spinning and Direct-Ink-Writing (DIW), respectively. For the latter purpose, BPw was dissolved in an ionic liquid, 1-ethyl-3-methylimidazolium acetate ([emim][OAc]), and regenerated into lignocellulose filaments with highly aligned nanofibrils (wide-angle X-ray scattering) that simultaneously showed extensibility (wet strain as high as 39%). BPw-derived lignocellulose filaments showed a tenacity (up to 2.3 cN dtex-1) that is comparable to that of rayon fibers and showed low light reflectance (R ES factor <3%). Meanwhile, DIW of the respective gels led to meshes with up to 60% wet stretchability. The LCF and meshes were demonstrated to have reliable performance in marine environments. As a demonstration, we show the prospects of replacing plastic cords and other materials used to restore coral reefs on the coast of Mexico.

Evaluation of the PLA-nZH-Cu Nanocomposite Film on the Micro-Biological, Organoleptic and Physicochemical Qualities of Packed Chicken Meat.

This research evaluated the contribution of nanocomposite films based on different concentrations of nZH-Cu (1%, 2%, and 3%) to the microbiological, organoleptic, and physicochemical characteristics of packed chicken breast meat. Analysis of some meat quality traits, such as microbiological, chemical, and physical, were conducted on a laboratory scale. For this, small squares of chicken breast meat, weighing approximately 10 g, were aseptically wrapped with rectangular pieces of 5 × 10 cm PLA-nZH-Cu nanocomposite films, which were stored at 4 °C for 20 days. The microbiological results indicated efficient antibacterial activity (at any nZH-Cu concentration in the nanocomposite films) on the total viable count of groups of psychrophiles, aerobic mesophiles, Enterobacteriaceae, and Salmonella spp. until day 10 of storage (p < 0.05). No significant changes were observed in the organoleptic (color) and physicochemical qualities (texture, weight, pH, and acidity) until day 10 of storage at 4 °C (p < 0.05). The analysis of the experimental tests carried out determined that the PLA-nZH-Cu nanocomposite films played an effective role in the bacterial safety of the packaged chicken. It was concluded that the nZH-Cu nanocomposite films, at all concentrations tested, extended the shelf life of the chicken breast meat for up to 10 days in a refrigerator at 4 °C.

Coaxial Spinning of All-Cellulose Systems for Enhanced Toughness: Filaments of Oxidized Nanofibrils Sheathed in Cellulose II Regenerated from a Protic Ionic Liquid.

Hydrogels of TEMPO-oxidized nanocellulose were stabilized for dry-jet wet spinning using a shell of cellulose dissolved in 1,5-diazabicyclo[4.3.0]non-5-enium propionate ([DBNH][CO2Et]), a protic ionic liquid (PIL). Coagulation in an acidic water bath resulted in continuous core-shell filaments (CSFs) that were tough and flexible with an average dry (and wet) toughness of ∼11 (2) MJ·m-3 and elongation of ∼9 (14) %. The CSF morphology, chemical composition, thermal stability, crystallinity, and bacterial activity were assessed using scanning electron microscopy with energy-dispersive X-ray spectroscopy, liquid-state nuclear magnetic resonance, Fourier transform infrared spectroscopy, thermogravimetric analysis, pyrolysis gas chromatography-mass spectrometry, wide-angle X-ray scattering, and bacterial cell culturing, respectively. The coaxial wet spinning yields PIL-free systems carrying on the surface the cellulose II polymorph, which not only enhances the toughness of the filaments but facilities their functionalization.

Obtaining Nanoparticles of Chilean Natural Zeolite and its Ion Exchange with Copper Salt (Cu2+) for Antibacterial Applications.

This article describes the production of nanoparticles of Chilean natural zeolite, using three size reduction methods: Ball mill, microgrinding, and microfluidization. Morphological characterization of samples indicated an average diameter of 37.2 ± 15.8 nm of the zeolite particles. The size reduction and chemical treatments did not affect the morphology or integrity of the zeolite. An increase of the zeolite samples' Si/Al ratio was observed after the acid treatment and was confirmed by SEM-EDX analysis. Moreover, the effectiveness of the copper salt ion exchange (Cu2+) to the zeolite nanoparticles was analyzed by SEM-EDX. XRD analysis indicated that clinoptilolite and mordenite are the main phases of Chilean natural zeolite, and the crystalline structure was not affected by the modification processes. The FTIR characterization showed the presence of chemical bonds of copper with the zeolite nanoparticle framework. The ion-exchanged zeolite nanoparticles were evaluated for antibacterial behavior by the disc diffusion method. Additionally, the minimum inhibitory concentration and minimum bactericidal concentration were obtained. Microbiological assays with copper-exchanged nanozeolites showed an antimicrobial activity with a bactericidal effect against Escherichia coli and Staphylococcus aureus, which are the primary pathogens of food and are also resistant to multiple drugs. In this study, a new application for natural nanozeolites is demonstrated, as the incorporated copper ions (Cu2+) in nanozeolites registered a productive antibacterial activity.